Christmas/New Year trading

We will close from 18 December and re-open 6 January. Please order stainless steel louvres by 9 December and any other orders by 13 December for delivery by Christmas.

Under new management

As of October 2024, Broad Louvre Vent have taken on Speedex's popular lines of louvre vents and ripple strips. There may be some slight delays, so if you have any concerns, please give us a call.

JAGUAR Bonnet and side louvre panels, FOLDED - E-TYPE & MK2

E-TYPE JAGUAR FOLDED BONNET LOUVRE PANELS - STEEL

This E-TYPE Jag Folded Bonnet Louver panels shown above has 10mm high folds. We also manufacture and supply E-TYPE Jag Bonnet panels 20mm high folds shown below.

 

 

We manufacture E-Type Jaguar Folded Bonnet Louvers.

The overall size of the folded louver panels is 255mm wide x 380mm long.

The louvers are 8.5inch wide and pressed in a special Jaguar styled squarish and angled louver shape.

There are 14 louver vents per panel.

We now sell E-type Jaguar Folded Bonnet Louver panels in 2 different fold heights- 10mm and 20mm. So the folded rim is either 10 or 20mm high due to customer request for both versions.

 

MK2 JAGUAR FOLDED BONNET LOUVRE PANELS - STEEL

We now also manufacture and supply larger folded louvred bonnet panels to suit Jaguar MK2 vehicles.

The overall size of the MK2 folded louver panels are now 280mm wide (11 inches) x 560mm long (22 inches).

The individual louvers are now increased to 19mm wide x 250mm long (10 inches approximately) x 15mm deep!! (The air opening or depth is now 15mm! )

They are among the deepest we have now made to have absolute maximum airflow!

The pitch or spacing is 25.4mm or 1 inch.

There are 21 individual louvers pressed down each per panel.

We sell as a Pair.

Material = Steel

The folded height is 20mm standard. ( but we can alter this from 10mm to 20mm if requested by customer).

$300.00 / pair

 

MK2 JAGUAR FOLDED VERTICAL SIDE LOUVRE PANELS - STEEL

 

We now also manufacture and supply folded louvred panels to suit Jaguar Mk2 vertical side panels.

The overall size of the MK2 folded vertical side louvred panels are now 200mm wide x 420mm high .

Due to customer feedback we decided to increase the size of the louvre vents so that they standout!

The individual louvers are now 30mm wide x 380mm long x 20mm deep or 20mm opening height!

This is the widest louvre that we currently manufature and the deepest!.

The minimum pitch or spacing is 40mm.

There are 4 louver vents pressed across each per panel.

We sell as a Pair.

The folded height is 20mm standard. ( but we can alter this from 10mm to 20mm if requested by customer).

 

 

$320.00 / pair

These Triangular Jaguar panels fit on the sides of an MK2 Jag.

These panels are made from special mirror finish stainless steel.

They fit next to wheel arch which is why they are curved.

These panels meaure 220mm wide x 350mm high with various 25mm wide louvres pressed in them.

We can make in any material.

 

 

 

 

 

 

 

 


There are no products to list in this category.